Bug #57052

#1355480641: Execution of subprocess failed with exit code 1 without any further output.

Added by Rachitha Senevirathne over 7 years ago. Updated over 7 years ago.

Status:
Closed
Priority:
Should have
Category:
- Error Handler Report -
Start date:
2014-03-18
Due date:
% Done:

0%

Estimated time:
PHP Version:
5.4
Has patch:
No
Complexity:
medium

Description

Execution of subprocess failed with exit code 1 without any further output. (Please check your PHP error log for possible Fatal errors)
12 TYPO3\Flow\Core\Booting\Scripts::executeCommand("typo3.flow:core:compile", array|18|)

11 TYPO3\Flow\Core\Booting\Scripts::initializeProxyClasses(TYPO3\Flow\Core\Bootstrap)

10 call_user_func(array|2|, TYPO3\Flow\Core\Bootstrap)

9 TYPO3\Flow\Core\Booting\Step::__invoke(TYPO3\Flow\Core\Bootstrap)

8 TYPO3\Flow\Core\Booting\Sequence::invokeStep(TYPO3\Flow\Core\Booting\Step, TYPO3\Flow\Core\Bootstrap)

7 TYPO3\Flow\Core\Booting\Sequence::invokeStep(TYPO3\Flow\Core\Booting\Step, TYPO3\Flow\Core\Bootstrap)

6 TYPO3\Flow\Core\Booting\Sequence::invokeStep(TYPO3\Flow\Core\Booting\Step, TYPO3\Flow\Core\Bootstrap)

5 TYPO3\Flow\Core\Booting\Sequence::invokeStep(TYPO3\Flow\Core\Booting\Step, TYPO3\Flow\Core\Bootstrap)

4 TYPO3\Flow\Core\Booting\Sequence::invoke(TYPO3\Flow\Core\Bootstrap)

3 TYPO3\Flow\Http\RequestHandler::boot()

2 TYPO3\Flow\Http\RequestHandler::handleRequest()

1 TYPO3\Flow\Core\Bootstrap::run()

Please include more helpful information!
#1

Updated by Bastian Waidelich over 7 years ago

  • Status changed from New to Needs Feedback
  • Assignee set to Bastian Waidelich
  • Priority changed from Must have to Should have

Rachitha Senevirathne wrote:

Hi Rachitha,

Please include more helpful information!

You too ;)
  • What Flow/PHP version are you running?
  • What did you do before the error occurred (did Flow run w/o errors before?)
  • Did you have a look into the Flow log files?
#2

Updated by Rachitha Senevirathne over 7 years ago

Bastian Waidelich wrote:

Rachitha Senevirathne wrote:

Hi Rachitha,

Please include more helpful information!

You too ;)
  • What Flow/PHP version are you running?
  • What did you do before the error occurred (did Flow run w/o errors before?)
  • Did you have a look into the Flow log files?

Hello Bastian,

I am using Flow-2.2.0-beta1 on php5.4.12.
This occurs when I try to run the flow.
I haven't check the log files. How I can check them?

#3

Updated by Adrian Föder over 7 years ago

  • Assignee changed from Bastian Waidelich to Rachitha Senevirathne

Hi Rachitha,
please have a look into your plain PHP log file, and in Data/Logs(/Exceptions).

#4

Updated by Rachitha Senevirathne over 7 years ago

Hi Adrian,
I will do so.

#5

Updated by Rachitha Senevirathne over 7 years ago

This is the log file..

Uncaught exception #1355480641 in line 249 of C:\wamp\www\flowOLD\Packages\Framework\TYPO3.Flow\Classes\TYPO3\Flow\Core\Booting\Scripts.php: Execution of subprocess failed with exit code 1 without any further output. (Please check your PHP error log for possible Fatal errors)

12 TYPO3\Flow\Core\Booting\Scripts::executeCommand("typo3.flow:core:compile", array|18|)
11 TYPO3\Flow\Core\Booting\Scripts::initializeProxyClasses(TYPO3\Flow\Core\Bootstrap)
10 call_user_func(array|2|, TYPO3\Flow\Core\Bootstrap)
9 TYPO3\Flow\Core\Booting\Step::__invoke(TYPO3\Flow\Core\Bootstrap)
8 TYPO3\Flow\Core\Booting\Sequence::invokeStep(TYPO3\Flow\Core\Booting\Step, TYPO3\Flow\Core\Bootstrap)
7 TYPO3\Flow\Core\Booting\Sequence::invokeStep(TYPO3\Flow\Core\Booting\Step, TYPO3\Flow\Core\Bootstrap)
6 TYPO3\Flow\Core\Booting\Sequence::invokeStep(TYPO3\Flow\Core\Booting\Step, TYPO3\Flow\Core\Bootstrap)
5 TYPO3\Flow\Core\Booting\Sequence::invokeStep(TYPO3\Flow\Core\Booting\Step, TYPO3\Flow\Core\Bootstrap)
4 TYPO3\Flow\Core\Booting\Sequence::invoke(TYPO3\Flow\Core\Bootstrap)
3 TYPO3\Flow\Http\RequestHandler::boot()
2 TYPO3\Flow\Http\RequestHandler::handleRequest()
1 TYPO3\Flow\Core\Bootstrap::run()

#6

Updated by Bastian Waidelich over 7 years ago

  • Assignee changed from Rachitha Senevirathne to Bastian Waidelich

@Adrian thanks for the feedback, but please don't change the assignee. I'll look into this

#7

Updated by Bastian Waidelich over 7 years ago

Rachitha, apperently your PHP does not output any errors. In your development environment you should enable this (see http://www.php.net/manual/en/ref.errorfunc.php).
And also please take a look at your PHP error log!

#8

Updated by Rachitha Senevirathne over 7 years ago

Bastian Waidelich wrote:

Rachitha, apperently your PHP does not output any errors. In your development environment you should enable this (see http://www.php.net/manual/en/ref.errorfunc.php).
And also please take a look at your PHP error log!

Hi Bastian,
My php error log also not out put any error message.

#9

Updated by Bastian Waidelich over 7 years ago

Rachitha Senevirathne wrote:

My php error log also not out put any error message.

Mh, then you seem to have a weird setup somehow.. What happens if you just create a plain PHP file with errors and browse to it directly?

If that works as expected, you might have different PHP versions installed on your system and Flow's sub-request uses not the same one as your web server.
In that case you can specify the location of the PHP binary via the "phpBinaryPathAndFilename" setting. See http://wiki.typo3.org/Flow_Installation_Hints#Running_on_Windows_OS.27s

#10

Updated by Rachitha Senevirathne over 7 years ago

Bastian Waidelich wrote:

Rachitha Senevirathne wrote:

My php error log also not out put any error message.

Mh, then you seem to have a weird setup somehow.. What happens if you just create a plain PHP file with errors and browse to it directly?

If that works as expected, you might have different PHP versions installed on your system and Flow's sub-request uses not the same one as your web server.
In that case you can specify the location of the PHP binary via the "phpBinaryPathAndFilename" setting. See http://wiki.typo3.org/Flow_Installation_Hints#Running_on_Windows_OS.27s

Plain php file with errors shows the expected results. And also My php version is php5.4.12 and it is latest than than the requested version.
And also its correctly set the path for php.exe via phpBinaryPathAndFilename.

#11

Updated by Bastian Waidelich over 7 years ago

Rachitha Senevirathne wrote:

Plain php file with errors shows the expected results. And also My php version is php5.4.12 and it is latest than than the requested version.
And also its correctly set the path for php.exe via phpBinaryPathAndFilename.

This is quite strange.. Did you already try to run Neos. It has a setup wizard that detects some incompatible PHP settings, maybe that helps?

#12

Updated by Bastian Waidelich over 7 years ago

..one more thing I just realized: Your installation points to C:\wamp\www\*flowOLD*\ - are you sure that's Flow-2.2.0-beta1?
We had a bug in a previous version that prevented the error output, but it was fixed with https://review.typo3.org/18873

#13

Updated by Bastian Waidelich over 7 years ago

  • Status changed from Needs Feedback to Closed

Closing due to missing feedback.
Feel free to comment and/or re-open

Also available in: Atom PDF