Bug #65821
closed
RTE: Images are not generated reduced - only the height and width attribute is changed
Added by Harald no-lastname-given about 9 years ago. Updated over 6 years ago.
100%
Description
When images inserted in RTE and its size be changed, only the height and width attribute is changed. The path to the image points to the original image in the source folder (look FE source). If the image is not scaled to the appropriate size (file admin \ processed)?!
I think that was standard until now?!
Thank You
Harald
Files
| fe.png (541 KB) fe.png | Harald no-lastname-given, 2015-03-18 21:17 | ||
| rte-be.png (35.7 KB) rte-be.png | Harald no-lastname-given, 2015-03-18 21:17 | ||
| rte-settings.png (39 KB) rte-settings.png | Harald no-lastname-given, 2015-03-18 21:17 | ||
| error-after-clear-temp.JPG (18.2 KB) error-after-clear-temp.JPG | Harald no-lastname-given, 2015-05-22 09:47 |
Updated by Stanislas Rolland about 9 years ago
- Status changed from New to Needs Feedback
- Assignee deleted (
Stanislas Rolland)
Well, it depends, are you referring to images inserted as plain images or as magic images?
Updated by Harald no-lastname-given about 9 years ago
I refer to the TYPO3 version 7.2.0-dev, which I have forgotten.
So, the picture size is not changed in all three ways. Not as a normal image, not as magical picture and not with drag and drop.
In FE is always referenced to the original image
Updated by Stanislas Rolland about 9 years ago
I am unable to reproduce this issue.
Updated by Harald no-lastname-given about 9 years ago
- File fe.png fe.png added
- File rte-be.png rte-be.png added
- File rte-settings.png rte-settings.png added
But I do not understand.
I am using an almost naked basic installation without additional configuration - not even for the RTE. Only the most necessary configurations.
In the appendix some screen shots
Updated by Stanislas Rolland about 9 years ago
Did you run all the Setup test of the install tool?
Updated by Harald no-lastname-given about 9 years ago
Thus, for safety's sake I have now completed all the tests in the Installation Tool positive. Also, the test images without any problems. No special occurrences.
Updated by Harald no-lastname-given about 9 years ago
My Feedback!
I've had some time pass. I have the past, present TYPO3 7.2.0-dev recorded. Unfortunately, nothing has changed. The images are not reduced. The image path always points to the original image in the source folder. I tried it on three different installations - nothing changes ?!
Thank You
Harald
Updated by Markus Klein about 9 years ago
- Target version deleted (
7.2 (Frontend))
Updated by Markus Klein about 9 years ago
Can't reproduce on current master.
- Created new CE.
- Added "magic image" to RTE.
- Changed size to 200x200
Output load processed file.
Updated by Riccardo De Contardi about 9 years ago
Please, Harald, could you test again with the current master? Thank you
Updated by Harald no-lastname-given almost 9 years ago
Hello!
I have found a possible cause or maybe helping them following note on.
I made a new naked TYPO3 installation (7.2.0) on my Hoster "Weiland". No additional extensions or configurations! I have in the installation tool the "Development settings Enable debug output ..."
enabled.
I have enabled in rtehtmlarea "Enable Images in the RTE". That's all!
Then I have a content element of the type created "Regular text element". Then I add about the icon an image. About "New Magic Image". This image is scaled down accordingly and is in processed >>> SUPER !!!
But if I now repeat the process or insert a new image in the same way, then my mistake described is produced. The image is not scaled down and pointing at the source path! Now I arrive at the following:
When I open the user settings and here in the tab "Edit & Advanced functions" to "Clear Temporary Data" button press, I get the following error:
router
PHP Warning: Creating default object from empty value in
....... / Typo3 / sysext / backend / Classes / Tree / PageTree / ExtdirectTreeCommands.php line 349
I have also sent a screenshot (error-after-clear-temp).
If I then insert a picture and repeating this process, it works again. Then I have to repeat the process, etc. It only works whenever the "Clear Temporary Data" button press! It also comes always this error message.
Thank you and maybe you Hiltz further that. I know no solution
I add after a picture, it will work again once. Then I have to repeat the process, etc. It only works whenever the "Clear Temporary Data" button press!
Thank you and maybe you Hiltz further that. I know no solution
Updated by Harald no-lastname-given almost 9 years ago
Now I can even more accurate notice!
When I use the file browser "Insert Image" open over the icon and a picture of "New Magic Image" select them it does not work!
But if:
When I use the file browser "Insert Image" open over the icon and a picture of "New Magic Image" select them, but first click on the appropriate folder in the Folder Tree and then select them the picture, it is working properly !!!! ????
So it always works. So only when I previously click on the appropriate folder and is updated so !! ??
Why do I have the Folder Tree before updating to make it work ???
Updated by Markus Klein almost 9 years ago
- Status changed from Needs Feedback to Accepted
- Target version set to 7.3 (Packages)
- Sprint Focus set to Stabilization Sprint
I can confirm the issue with images not being scaled upon inserting them into RTE.
Inserting a "magic image" and clicking an image title directly, fails to scale the inserted image. Selecting a folder from the tree first and clicking the title then works as expected.
@Harald: Am I assuming right, that I may change the title of this issue to "Inserting magic images into RTE fails when selecting an image directly"?
Updated by Harald no-lastname-given almost 9 years ago
Hi Markus,
yes that's right. Please change the title of this issue.
Thank you for the effort and one to comprehend. Never give up :-)
greeting
Harald
Updated by Harald no-lastname-given almost 9 years ago
Stop!
When I insert a "normal image" it does not work with:
"So Previously Only When I click on the Appropriate folder and is updated so"
Here it works in neither case ?!
Updated by Harald no-lastname-given almost 9 years ago
.......the method only works with the "Magic Image"
Updated by Markus Klein almost 9 years ago
- Assignee set to Markus Klein
Ok, first investigation reveals the issue.
When opening the Insert Image dialog, the first tab (magic image) is selected, but internally it thinks it is the plain-image tab.
Therefore it inserts a plain image instead of the magic one. Clicking the tree once, solves the issue by having the correct internal state.
Updated by Markus Klein almost 9 years ago
- Assignee changed from Markus Klein to Stanislas Rolland
- Is Regression changed from No to Yes
Updated by Gerrit Code Review almost 9 years ago
- Status changed from Accepted to Under Review
Patch set 1 for branch master of project Packages/TYPO3.CMS has been pushed to the review server.
It is available at http://review.typo3.org/40155
Updated by Gerrit Code Review almost 9 years ago
Patch set 2 for branch master of project Packages/TYPO3.CMS has been pushed to the review server.
It is available at http://review.typo3.org/40155
Updated by Andreas Fernandez almost 9 years ago
- Status changed from Under Review to Resolved
- % Done changed from 0 to 100
Applied in changeset e079c5d313aa742a323bd3fc085e6f305a3e5ca7.
Updated by Riccardo De Contardi over 6 years ago
- Status changed from Resolved to Closed